Policy

ACOUSTIC REVIVE - Japanese Hi-End Cables & Accessories

world's first! Revolutionary 4-split LAN cable

LAN-QUADRANT-TripleC uses an innovative structure in which the cable is completely divided into four parts for each purpose.
The 4-split cable structure, which can now be called Category 9, completely avoids interference between cables, reduces noise and distortion, and dramatically improves quality.

PC-TripleC single wire conductor

LAN-QUADRANT-TripleC uses a single wire PC-TripleC conductor, the world's first conductor exclusively for acoustics, whose crystal structure is continuous in the horizontal direction of electricity flow using a forging method.

As is clear from the fact that all commercially available LAN cables with a length of 10 m or longer are made of single-wire conductors, stranded wire conductors made by twisting thin wires create stray currents called alien crosstalk, making long-distance transmission and ultra-high frequency components difficult. Transmission will become impossible.

LAN-QUADRANT-TripleC achieves the ultimate LAN transmission by using the world's highest acoustic conductor, PC-TripleC, in a single wire with the thickness of the manufacturing limit.

Cable construction and materials for superior transmission characteristics and sound quality

The conductor of LAN-QUADRANT-TripleC is made of Teflon, which has an excellent dielectric constant.
Relative permittivity refers to the power to stop current. PVC, which is used as the insulation material for many LAN cables including those made by audio manufacturers, has a high relative permittivity of 5.6, but Teflon has a high relative permittivity of 5.6. The relative dielectric constant is 2.2, less than half the value, achieving overwhelming transmission speed. In addition, the cushioning material is made of natural silk that prevents the generation of static electricity and achieves organic and smooth sound quality, and is divided into 4 sections using PC-TripleC braided shields that do not cause any peculiarities in sound quality and have excellent shielding characteristics in all bands. Each individual cable produced has achieved overwhelming quality.

Telegardner LAN plug and various conductivity improvement treatments

The plug of LAN-QUADRANT-TripleC is made by Telegardner, which is currently the world's highest in reliability and sound quality, and the contact point with the cable conductor is treated with contact conduction cleaner ECI-50 and organically treated to suppress the generation of static electricity. The sound quality has been thoroughly polished by using Kiyoseki, which achieves a vivid tone and texture.

Most audio LAN cables were conventional LAN cables with a special material shield added, but LAN-1.0 TripleC newly introduces PC-TripleC as a conductor.

The LAN plug is made of Telegardner, which currently has the highest quality and highest quality.The insulating material is a fluorine resin that has an excellent dielectric constant and achieves ultra-high transmission speed.The shield has the best shielding characteristics in the audio band, and has the highest sound quality. Adopts copper foil that does not generate characters.

Furthermore, a carbon CSF tube is attached to the outermost circumference to prevent the generation of static electricity and provide a double shielding effect, making this a true audio-grade LAN cable.

1m - $1525. each additional 0.5 Meters $850.

Review: 

Why do optical discs, such as CD, become magnetized?

Firstly, it is thought that ferrous ingredients contained in the printing ink of the label side of the disc are one of the causes of magnetizing discs. For example, iron oxide is used for red, yellow, or brown ink, cobalt is used for blue or green ink and nickel is used for silver ink. These materials, iron, cobalt, nickel, are called ferromagnetic substances, and they are relatively easy to magnetize.

Second, problems are caused by the use of aluminum used for the recording side of CD. Currently, the JIS (Japanese Industrial Standard) states that the purity of the aluminum used must be 99.0%. The other 1% contains ferromagnetic substances such as iron, nickel, and cobalt. Aluminum is a weak magnetic material, so it is easily influenced by magnetism.

CD players contain magnetic substances, when a disc is played, the rotation of the mechanism, magnet, and motor generate a flux which quickly causes discs to become magnetized.

The multi-purpose audio demagnetizer RD-3 is a groundbreaking appliance which can easily treat and completely demagnetize all kind of optical discs (CD, DVD, etc). If you demagnetize your disc by RD-3, sound and picture quality are much improved and you will be able to hear aspects of the recording that were inaudible from magnetized discs.

RD-3 also has a remarkable effect on digital recording media such as CD-R, DVD-R. If a disc is demagnetized by RD-3 before recording, the sound quality improves greatly regardless of the recording device or software.

For this reason, the RD-3 is widely used in the mastering rooms of major recording studios.

The RD-3 makes a further effect by combined use with our Negative-Ion generator RIO-5II.

La Folia Online Music Review  Acoustic Revive’s RR-888: Further Observations
by Mike Silverton (November, 2012)

What is the Schumann Resonance?

The Final version of the low frequency generator RR-888 with substantially less noise and rich sound. This product is only available at authorized distributors. Similar products on ebay and other auctions, amazon, or any other type of internet dealer are counterfeit.

The "Schumann Resonance" is a resonance frequency that exists in the Earth's "electromagnetic" cavity; i.e. between terrestrial surface and ionosphere. German physicist W.O.Schumann first detected the resonant properties of this terrestrial cavity in 1954. It is said that the Schumann Resonance is a breathing phenomenon of the Earth that is lasting from old time of the Earth creation and is giving a positive effect to the human brain.

Humans, animals and plants have become accustomed to this frequency of 7.83Hz over a very long period of evolution.

But recently, many unnatural radio waves and electromagnetic waves disturb this frequency of 7.83Hz, it has changed the influence that it has on us.

Our research was started from the point of view that [If Schumann Resonance Waves have a positive effect on the human brain, how does it react to human hearing?], it became clear that there was a surprising effect to both of hearing and sight.

Then, we developed and manufactured a device to generate the 7.83Hz electric wave artificially, the Ultra-low Frequency generator RR-888 (Patent Pending)

Effect

RR-888 changes your listening room to the sound field without muddiness and fills it with a feeling of air, reproducing a realistic sound stage where all the musical instruments are set free.

This effect has been evaluated also by musicians and recording engineers, and RR-888 is used at several mixing rooms and mastering rooms.

RTP Series Power Supply Boxes - Power Conditioning Strips

Under Construction

• Audio Excellence Award 2008 Top Prize for Accessories
• Audio Excellence Award 2008 Judge Special Prize
• Stereo Times Most Wanted Components Award 2008

Principle and Structure

Machined from a single block of 2017 Duralumin!
RTP-2, 4 and 6 ultimate boxes are made from 2017 Duralumin, which has the best vibration damping characteristic and sound quality.

Comparison of the vibration reduction characteristics of various metals

A machined structure has far better vibration damping characteristics, sound quality and overall lower distortion when compared with metal sheets bolted together to form a box.

The box's maximum thickness is 25mm, making it able to be very highly effectively in shielding the inner structural elements, and yielding a very high S/N ratio.

"The Acoustic Revive products have made me a believer in the power of optimizing a system to realize its full musical potential." Jeff Day, The Acoustic Revive Chronicles, Positive Feedback

A block of Duralumin weighs 3kg (6.6 Pounds) for RTP-2 ultimate, 4kg (8.8 Pounds) for RTP-4 ultimate and 6kg 13.2 Pounds) for RTP-6 ultimate.

It takes about 5 hours to machine one block and lid for RTP-2 ultimate using a high precision mill, 8 hours for the RTP-4 ultimate and RTP-6 ultimate.
Eliminates noise and static electricity, non-magnetic!

RTP-2, 4 and 6 ultimate`s box is filled with Green carborundum, Tourmaline powder and natural quartz powder to eliminate noise and static electricity.

Most power supply boxes use a series type noise filter, which converts noise to heat by magnetism which not only absorbs noise, but also absorbs important electrical energy.

Also the magnetic body of typical conditioners produces magnetic distortion which adds a distorted feel and thinness to the sound.

This is because the electromagnetic wave absorbent material itself is a strong magnetic body.

Also parallel type noise filters or choke coils cannot avoid loss in transmitting energy.

It may eliminate noise, but it the sense of freedom and energy from the sound.

Green carborundum has no such side effects because it is non-magnetic.

It only absorbs electromagnetic wave noise which is produced from receptacles and internal wiring.

Green carborundum is the only electromagnetic wave absorbent material which improves sound quality and S/N ratio.

Tourmaline powder releases negative ions to keep the amount static electricity very low.

The natural quartz powder releases far infrared rays which has an surface activation effect. This leads to very realistic and and alive sound.

 Duralumin block after it has been machined. After this it is sand blasted and treated with Snow White Alumite. The lid is grained in and treated with Black Alumite.

Carved out brass foot with epoch-making vibration control material!

Underneath the RTP-2, 4 and 6 ultimate`s box, there are brass carved out a large foot, white are height adjustable. A combination of 2017 Duralumin box and brass foot will eliminate both material's resonance frequency. Carved out brass foot with epoch-making vibration control material!

The ultimate material for power supply inlet and internal wiring too!

We adopted the ultimate power supply inlet and internal wiring for the RTP-2, 4, and 6 ultimate. As with the receptacles, the power supply inlet has been Super cryogenically treated and treated, and plated with thick silver and rhodium plating.

The inlet wiring connection is non-solder. ACOUSTIC REVIVE avoids solder connections when possible because it destroys signal transmission.

For internal wiring, we adopted FURUKAWA Electrical Industry’s oval-shaped very thick PCOCC-A which is the ultimate conduct characteristic. PCOCC-A is an annealed version of PCOCC (single crystal copper) manufactured by the high technology of FURUKAWA Electrical Industry.

PCOCC-A has superior conductive characteristics. Because it originally is a single core crystal, the chance of absorbing impurities is very low even when it gets annealed.

The oval-shaped single core is devoid of the peaky and distorted sound quality normally associated with round, rectangle, or flat shaped conductors.